Water-Based Paints
As environmental awareness increases, water-based coatings are becoming more common place in the industry.
With regular environmental changes and legislation taking place, at New Guard Coatings we always attempt to be ahead of the game in terms of our product offerings helping you make the correct product choices.
You therefore have access to a comprehensive range of water-based coatings through PPG’s AquaCover Range
Our Guard water-based product range could perhaps be for you? Check out the data sheets to discover the correct product for you.
Still not found what you are looking for? We are also able to tap into the technologies of a number of other manufacturers to access alternative water-based coatings. We even provide water-based alternatives to our existing solvent based paint and coatings.
Disclaimer
We endeavour to keep all Data and MSDS (Material Safety Data Sheets) current and up-to-date (within the last 3 months) on our website, however it is advised that you always speak with the office to ensure that you have the latest versions. Instructions for use and Safety Information should be be strictly adhered to at all times.

Sigma AquaCover 20 is a one-component, waterborne, high-build zinc phosphate primer/coatings, based on acrylic dispersion.
ref | WATLA |
---|---|
composition | 87% Polivinyl | 6,5% PES | 6,5% CO |
width | 140 |
Height | 100 |

Sigma AquaCover 200 is a two-component, polyamine-cured, waterborne epoxy primer.
ref | WATLA |
---|---|
composition | 87% Polivinyl | 6,5% PES | 6,5% CO |
width | 140 |
Height | 100 |

Sigma AquaCover 40 is a one-component, waterborne acrylic dispersion finish
ref | WATLA |
---|---|
composition | 87% Polivinyl | 6,5% PES | 6,5% CO |
width | 140 |
Height | 100 |

Sigma AquaCover 400 is a two-component, polyamine-cured, waterborne epoxy coating
ref | WATLA |
---|---|
composition | 87% Polivinyl | 6,5% PES | 6,5% CO |
width | 140 |
Height | 100 |

Sigma AquaCover 45 is a one-component, waterborne acrylic dispersion finish
ref | WATLA |
---|---|
composition | 87% Polivinyl | 6,5% PES | 6,5% CO |
width | 140 |
Height | 100 |

Sigma AquaCover 500 is a two component polyamine cured water borne epoxy finish.
ref | WATLA |
---|---|
composition | 87% Polivinyl | 6,5% PES | 6,5% CO |
width | 140 |
Height | 100 |

Sigma AquaCover 80 is a waterborne, high-build acrylic coating
ref | WATLA |
---|---|
composition | 87% Polivinyl | 6,5% PES | 6,5% CO |
width | 140 |
Height | 100 |