
Damp surface impregnation primer
ref | WATLA |
---|---|
composition | 87% Polivinyl | 6,5% PES | 6,5% CO |
width | 140 |
Height | 100 |

Jotun Jotafloor Sealer is a two component amide cured epoxy transparent coating. Excellent penetration properties to ensure good adhesion on most concrete floors in atmospheric environments only. Specially suited for properly prepared concrete substrates.

Jotun Jotafloor Topcoat is a two pack amide cured epoxy coating. User friendly, high performance product. Tintable in a wide range of colours with excellent gloss and colour retention.

Two component water borne epoxy for occasional light traffic on industrial floors.
ref | WATLA |
---|---|
composition | 87% Polivinyl | 6,5% PES | 6,5% CO |
width | 140 |
Height | 100 |

Two component solvent borne epoxy for occasional light traffic on industrial floors.
- This product has been discontinued, please contact us for an alternative.
ref | WATLA |
---|---|
composition | 87% Polivinyl | 6,5% PES | 6,5% CO |
width | 140 |
Height | 100 |

Two component solvent free epoxy for medium traffic floors.
This product has been discontinued, please contact us for an alterative.
ref | WATLA |
---|---|
composition | 87% Polivinyl | 6,5% PES | 6,5% CO |
width | 140 |
Height | 100 |

Three component solvent free epoxy for high abrasion, heavy traffic floors.
ref | WATLA |
---|---|
composition | 87% Polivinyl | 6,5% PES | 6,5% CO |
width | 140 |
Height | 100 |

Two component solvent free impregnating epoxy floor primer.
ref | WATLA |
---|---|
composition | 87% Polivinyl | 6,5% PES | 6,5% CO |
width | 140 |
Height | 100 |

Three component solvent free epoxy for heavy traffic floors.
ref | WATLA |
---|---|
composition | 87% Polivinyl | 6,5% PES | 6,5% CO |
width | 140 |
Height | 100 |

A two-pack, high solids, fast drying epoxy coating offering great adhesion, even at low temperatures. Formerly Amerlock 2, PPG SigmaCover 2 is ideal for steel and concrete even down to temperatures as low as 0°C, with fast drying properties.
- Colour: Standard primer colours and custom colours
- Gloss Level: Semi-gloss
ref | WATLA |
---|---|
composition | 87% Polivinyl | 6,5% PES | 6,5% CO |
width | 140 |
Height | 100 |