The Sigma AquaCover range offers water-based solutions that are also completely free from lead and chromate pigments. Health and safety legislation is forever changing and the demand for solvent free protective coatings is increasing – the Sigma AquaCover range has the answer.

  • Reliable atmospheric protection in coastal and light industrial areas.
  • Primers offer excellent rust prevention and long lasting steel, galvanised steel and concrete protection.
  • Coatings deliver high build quality in a range of semi-gloss colours.
  • Products can be thinned down with tap water.
  • Can be overcoated with conventional paints.
  • Applied by either airless spray, brush or roller.

A quality solution, designed with safety and VOC in mind.

Disclaimer

We endeavour to keep all Data and MSDS (Material Safety Data Sheets) current and up-to-date (within the last 3 months) on our website, however it is advised that you always speak with the office to ensure that you have the latest versions. Instructions for use and Safety Information should be be strictly adhered to at all times.

PPG AquaCover 45

Sigma AquaCover 45 is a one-component, waterborne acrylic dispersion finish

ref

WATLA

composition

87% Polivinyl | 6,5% PES | 6,5% CO

width

140

Height

100

PPG Aquacover One 625

One-component, waterborne acrylic zinc phosphate primer.

PPG Sigma AquaCover 20

Please note. This product is now discontinued. May we suggest using Aquazone One 625

Sigma AquaCover 20 is a one-component, waterborne, high-build zinc phosphate primer/coatings, based on acrylic dispersion.

 

ref

WATLA

composition

87% Polivinyl | 6,5% PES | 6,5% CO

width

140

Height

100

PPG Sigma AquaCover 200

Sigma AquaCover 200 is a two-component, polyamine-cured, waterborne epoxy primer.

ref

WATLA

composition

87% Polivinyl | 6,5% PES | 6,5% CO

width

140

Height

100

PPG Sigma AquaCover 40

Sigma AquaCover 40 is a one-component, waterborne acrylic dispersion finish

ref

WATLA

composition

87% Polivinyl | 6,5% PES | 6,5% CO

width

140

Height

100

PPG Sigma AquaCover 400

Sigma AquaCover 400 is a two-component, polyamine-cured, waterborne epoxy coating

This product is discontinued, may we suggest Sigma Aquacover 400 as an alternative.

ref

WATLA

composition

87% Polivinyl | 6,5% PES | 6,5% CO

width

140

Height

100

PPG Sigma AquaCover 500

Sigma AquaCover 500 is a two component polyamine cured water borne epoxy finish.

This product is discontinued, may we suggest Sigma Aquacover 400 as an alternative.

ref

WATLA

composition

87% Polivinyl | 6,5% PES | 6,5% CO

width

140

Height

100

PPG Sigma AquaCover 80

Sigma AquaCover 80 is a waterborne, high-build acrylic coating

ref

WATLA

composition

87% Polivinyl | 6,5% PES | 6,5% CO

width

140

Height

100

PPG Sigma AquaCover PeelCoat

Sigma AquaCover Peelcoat is a one component, spray applied, peelable waterborne coating.

ref

WATLA

composition

87% Polivinyl | 6,5% PES | 6,5% CO

width

140

Height

100