Rust-Oleum Noxyde is a single pack, high performance water-based elastomeric coating with unequaled corrosion protection.
Pack Sizes: 5 kg and 20 kg.
Single pack water-based elastomeric coating with unequaled corrosion protection, up to 20 years in the highest corrosion class C5-M, according to ISO 12944.
- 200% elastic coating that doesn’t crack or peel.
- Dry fall product; means that the overspray turns to dust before hitting the ground.
- Primer and topcoat in one.
- U.V and impact-resistant.
- Typical 2-coat system.
- No mixing or induction time.
- Re-use leftover paint.
- Kinder to the environment over similar solvent based coatings.
- Simply put the gun in water during breaks.
Best used on iron, steel, special alloys, galvanised and metallised iron, steel, aluminium, copper, zinc, lead, plastisol steel structures, cut edge corrosion, structural steel, metal cladding and plastisol roof sheets, commercial units, barns, etc.
Noxyde can even be diluted with 25% water to be used as an adhesion primer coat for only slightly and even non-porous surfaces such as glass, smooth bricks, polished-concrete and ceramics.
- Pure White
- Grey-White RAL9002
- Light Grey
- Pebble Grey RAL7032
- Silver-Grey RAL7001
- Goosewing Grey BS 10A05
- Anthracite Grey RAL7016
- Beige Grey
- Moss Green RAL6005
- Reseda Green RAL6011
- English Red
- Signal Black RAL9004
- Airless spray
Temperatures should be between 8°C and 55°C whilst theNoxyde is being applied. After approximately an hour and a half the paint will be touch dry and suitable to re coat after 24 hours.
Additional Supporting Product
Noxyde Tape is a self-adhesive tape made of a butyl rubber compound protected by a Fleece in Polypropylene. Designed to work for edge laps when applying Rust-Oleum Noxyde systems to roofs and cladding.
Download our Noxyde brochure here.
Another impressive Noxyde project of a 9000 sq/metres industrial unit.
For further advice regarding the use of this product, technical support or a quotation please contact us.