New Guard Coatings

UltraScape Flowpoint Rapid Set Grout

UltraScape Flowpoint Rapid Set Grout

Rapid setting grout in a pre-mixed dry pack; just add water.

UltraScape Flowpoint Rapid Set Grout:

Large local stocks available for collection from your local Branch; Click here to locate.

FlowpointUltraScape Flowpoint grout exceeds all the requirements of the latest British Standard.

Pack Size: 25kg paper bags


Product Description

Flowpoint grout has been in use for over 20 years in a variety of project environments including public realm, landscaping and domestic. It is synonymous with fast application, cost effective and robust jointing.

Product Benefits

  • Rapid setting
  • Initial set after 15 minutes at 20°C
  • Open to foot traffic in 1 hour
  • Open to vehicular traffic in 4 hours
  • Exceptional bond strength
  • Shrinkage compensated
  • Mixes quickly on-site with water
  • Economical to use
  • Conforms to BS 7533
  • Ideal for large-scale projects
  • Approved for use on the London Underground and Overground
  • NBS Plus registered for ease of specification
Natural Grey and Charcoal

Mixing and Application

Once the paving is ready to receive the grout the following method must be adhered to: Immediately prior to jointing it must be ensured that the joints are free from debris and all ponded water removed. The paving surface and joints must be pre-soaked and kept wet until the jointing process has been completed. A 25kg bag requires 4.25 litres of water and must be mixed for between 3 and 5 minutes until a smooth lump-free consistency has been achieved. Apply the mortar without delay. Do not store liquid mortar other than in transit from mixer. It must be carefully forced into the joints using a suitable rubber squeegee. The mortar should be constantly moved over the surface to repeatedly top up joints in which the mortar may have slumped following initial placement. Use the rubber squeegee to remove as much mortar as possible from the surface. The surface must be kept constantly moist using a soft spray of water. When the jointing mortar has hardened sufficiently or achieved its initial set the paving surface must be cleaned using a brush and copious amounts of water. Cleaning must be carried out thoroughly and no mortar must be allowed to remain on the surface of the paving.


Application Video


Technical Information

UltraScape Flowpoint is a fully pre-mixed dry-pack which only requires the addition of water on-site. It can fill joints from 5mm-50mm wide with a minumum target depth of 20mm, up to 200mm in one application. This highly fluid grout achieves a final compressive strength of 49.6N/mm2 (results achieved using 4.25 litres of water per 25kg bag), and will reach initial set in 30 minutes, will accept light foot traffic after 1 hour, and vehicular traffic after 4 hours (dependent upon temperature).



Please note: a small trial should be done to ensure compatibility with the stone being used as it is impossible to test all stone types. Wash all tools frequently. Mix only enough material to apply in 4 minutes. Never remix or add extra water. Wear protective clothing. Avoid skin and eye contact – wet cement can burn the skin. Cool temperatures retard, warm temperatures accelerate.


Contact Us

For further advice regarding the use of this product, technical support or a quotation please contact us.


There are no reviews yet.

Be the first to review “UltraScape Flowpoint Rapid Set Grout”

Your email address will not be published. Required fields are marked *