New Guard Coatings

UltraScape Flowpoint Smooth

UltraScape Flowpoint Smooth

Rapid set grout for smooth paving stones and slabs with joints as small as 3mm, providing a seamless surface to your construction.

  • Available in a 25kg unit.

UltraScape Flowpoint Smooth Rapid Set Grout.

Large local stocks available for collection from your local Branch; Click here to locate.

FlowpointUltraScape Flowpoint Smooth is a rapid setting flowable grout that exceeds all the requirements of the latest British Standard.

Pack Size: 25kg paper bags

Colours: Charcoal or Natural Grey

Product Description

Flowpoint Smooth has been in use for over 20 years in a variety of project environments including public realm, landscaping and domestic. The third variation of this award winning grout, Flowpoint Smooth, is ideally suited to smooth paving stones and slabs with joints as small as 3mm, providing a seamless surface to your construction.


Product Benefits

  • Provides a seamless surface
  • Open to foot traffic in 1 hour
  • Open to vehicular traffic in 4 hours
  • Rapid setting
  • Exceptional bond strength
  • Shrinkage compensated
  • Mixes quickly on-site with water
  • Initial set after 15 minutes at 20°C
  • Economical to use
  • Conforms to BS 7533
  • Ideal for large-scale projects



Available in charcoal and natural grey.


Product Applications

UltraScape Flowpoint Smooth is a rapid set grout with high fluid consistency for early trafficking that conforms to the strict demands of BS 7533. It is ideal for all pavements where a rigid or bound void-free joint is required. The product is suitable for application in town centre pedestrian schemes, pathways and carriageways, and can be used with natural stone, concrete flags and clay paviours.


Application Video


Technical Information

UltraScape Flowpoint Smooth is a fully pre-mixed dry-pack which only requires the addition of water on-site. It can fill joints from 3mm50mm wide with a minimum target depth of 20mm, up to 200mm in one application. This highly fluid grout achieves a final compressive strength of 49.6N/mm2 (results achieved using 4.25 litres of water per 25kg bag), and will reach initial set in 30 minutes, will accept light foot traffic after 1 hour, and vehicular traffic after 4 hours (dependent upon temperature).



Please note: a small trial should be done to ensure compatibility with the stone being used as it is impossible to test all stone types. Wash all tools frequently. Mix only enough material to apply in 4 minutes. Never remix or add extra water. Wear protective clothing. Avoid skin and eye contact – wet cement can burn the skin. Cool temperatures retard, warm temperatures accelerate.


Contact Us

For further advice regarding the use of this product, technical support or a quotation please contact us.


There are no reviews yet.

Be the first to review “UltraScape Flowpoint Smooth”

Your email address will not be published. Required fields are marked *