New Guard Coatings

FAST UK DELIVERY

LARGEST UK STOCKIST

TECHNICAL EXPERTS

DEDICATED ACCOUNT MANAGER


Intercrete 4807

Class R3 General Purpose Structural Repair Mortar (EN1504-3, DWI 31, BBA, WRAS)

Categories ,

Intercrete 4807 (Formerly Tiefill)

Intercrete 4807 is single component, water-based (VOC free), polymer modified, fibre reinforced, Portland cement based repair compound which exhibits unique hydraulic properties to produce a rapid setting curing mortar with enhanced polymer properties.

Technical assistance, product support and guidance are all available, just give us a call; 01937 586311, email us; uksales@newguardcoatings.com or click on the enquiry form below, we’re here to help you.

Intercrete 4807 is ideally suited for the filling of voids, particularly in new construction, which needs to be rapidly put into service, such as tieholes, grout holes and voids around fixings.

Specifically designed for the filling of tieholes formed by formwork bolts in new construction, particularly where a rapid setting, durable, waterproof mortar is required. Can also be used for sealing grout holes and voids around fixings in pre-cast elements.

Intercrete 4807 sets in 30 minutes at 20°C (68ºF), yielding a durable, high strength mortar which provides a waterproof seal which withstands 10 bar water pressure after only 72 hours curing.

Non-toxic when cured and WRAS approved for use in contact with potable water.

CE-marked in accordance with BS EN 1504-3, Class R4. Suitable for repair methods 3.1, 7.1, 7.2 as defined in BS EN 1504-3.

Main Characteristics

Product Chemistry
High Build Structural Repair Mortar
Volume Solids
100%
Maximum Dry film thickness
75000 μm
Minimum Dry film thickness
5000 μm
Number of components
Single Pack
Technical assistance, product support and guidance are all available, just give us a call; 01937 586311, email us; uksales@newguardcoatings.com or click on the enquiry form below, we’re here to help you.

Download Datasheet