- DESCRIPTION
- Related Products
- Datasheet
- Reviews
DESCRIPTION
Fosroc ExpandaFoam (Backing Rod) is a flexible, readily compressible, closed-cell polyethylene joint filler supplied in circular section cords.
Product Advantages
- Readily compressible
- Low load transfer
- Excellent recovery after compression
- Non-absorbent
- Rot-proof
- CFC-free
- Closed-cell polyethylene joint filler, back-up strips and cord
- Standards compliance BS 5628 Part 3 ‘Use of Masonry’ paragraph 20.4.
- DTp Specification for Highway Works, December 1991 series 1000. Clause 1015.
Product Uses
ExpandaFoam is a closed-cell polyethylene joint filler for use as an expansion joint filler in brick and blockwork, isolation joints and hinge joints where a readily compressible low load transfer joint filler is required. Strip and cord sections are also available. These are used as back-up strips for elastomeric sealants. Back-up / bond breaker strip to support sealants Bridge decks, abutments, pier hinge joints Brick and block-work in building superstructures
Application Instructions
When used as an expansion or isolation joint filler in brickwork, Expandafoam should be positioned to provide for a surface sealing slot of the required dimensions ensuring that the sealing slot is free from mortar droppings or slurry bridging. Expandafoam sheets may be fixed into position using a suitable adhesive. Care should be taken not to contaminate the surfaces of the sealing slot with adhesive. Where Expandafoam is used as the joint filler no additional bond breaker is necessary. Used as a back-up / bond breaker strip Expandafoam serves both to regulate the depth of the sealing slot required and ensures that the movement of the joint sealant is not restricted by three-sided adhesion. The size of the back-up strip should be approximately 20% greater than the joint width and depressed sufficiently to provide the required sealing slot dimensions. Circular cord sections provide a convex face giving an optimum seal configuration, they also overcome any problem of twisting which can occur with square or rectangular sections.
Contact Us
For further advice regarding the use of this product, technical support or a quotation please contact us.
Related Products
-
PPG Sigma Anti-Slip Aggregate Fine
Fine grade aggregate for anti-slip. 5.56 litres -
PPG SigmaCover 2
A two-pack, high solids, fast drying epoxy coating offering great adhesion, even at low temperatures. Formerly Amerlock 2, PPG SigmaCover 2 is ideal for steel and concrete even down to temperatures as low as 0°C, with fast drying properties. -
Jotun Jotamastic Smart Pack
A two-component surface tolerant, high solids epoxy mastic coating for general and marine use.Pack Size: 10 litres
-
Jotun Thinner No. 17
Thinner designed to improve the flow of a range of Jotun epoxy products. Also for cleaning pumps and tools before and after painting.
Reviews
There are no reviews yet.