All – Page 21

Jotatherm TB550 is a two component solvent free syntactic epoxy thermal barrier that provides heat reduction, protection against cryogenic spill and long term corrosion protection.

Hardtop One is a one component moisture curing acrylic polysiloxane coating.

Pack Size: 5 Litres and 20 Litres

Colours: Fully tint-able

Barrier Smart Pack is a high solids ceramically reinforced zinc rich epoxy targeting the maintenance market.

Pack Size: 6L

Colour: Grey

Jotun Jotafloor Solvent Free Primer is a two component amine cured solvent free epoxy coating.

Pack Size: 19.5L

Colour: Transparent

Jotun Seaforce 30M is a one componenent high solids hydrolising antifouling coating.

Jotun Seaforce 90 is a one component acrylic, hydrolysing antifouling coating.

Jotun Seaquantum Ultra S is a one component antifouling coating.

UltraScape flowpoint Fine is a rapid set grout with high fluid consistency for early trafficking that conforms to the strict demands of BS 7533

• Available in a 20kg unit.

Rust-Oleum Speed Screed is 'self-levelling' pourable, durable resurfacing material for rapidly smoothing uneven, damaged or worn concrete floors.  

Guard GIP is a high-build, solvent-based zinc phosphate primer for mild steel, ferrous and suitably prepared non-ferrous metal substrates.

Pack Sizes: 5 litres, 20 litres

Colours: Red Oxide, Grey, Black, White

Gloss Level: Matt

Guard ETC is a solvent-based acid-etch primer for mixed/difficult metal surfaces including zinc, aluminium. Promotes adhesion of subsequent coatings.

• Pack Sizes: 5 litres
• Colours: Black, Grey and White
• Gloss Level: Matt

Guard ETC-2K is an acid self etching paint supplied in a two pack format and containing zinc phosphate but being 'zinc chromate free'.

Pack Sizes: 10 Litre composite (5 Litre Base + 5 Litre Activator)

Colours: Light Grey and Yellow

Gloss Level: Matt

This product is for professional use only. As of 2023, adequate training is essential before use. Please visit:https://www.safeusediisocyanates.eu/ to learn more. A surface tolerant product for mixed metal surfaces, where minimal preparation can be carried out. Two component for optimum protection.

Pack Sizes: 5 litres

Colours: Tintable

Gloss Level: Matt and Satin

 

Guard EP single pack solvent-based, quick drying, high build, zinc phosphate primer for various substrates including metal, steel, fabrication works.

Pack Sizes: 1 litre, 2.5 litres, 5 litres and 20 litres

Colours: Red Oxide and Grey

Gloss Level: Matt

Please note: This product is now discontinued. Please contact us for a suitable alternative.

Guard FEB is a high quality, fast-drying solvent-based synthetic alkyd enamel, with outstanding film hardness/toughness and minimal yellowing.

Pack Sizes: 5 litres (Nominal Volume)

Colours: Full tintable colour range. All RAL & BS4800 colours and specials on request

Gloss Level: Gloss

Guard FES is a solvent-based industrial enamel paint ideal for when quick drying, high gloss, durable and tough coatings are needed.

Pack Sizes: 5 litres (Nominal Volume)

Colours: Full tintable colour range. All RAL & BS4800 colours and specials on request

Gloss Level: Gloss

Guard SPU general purpose multi-surface gloss floor enamel coating for domestic, industrial, and warehouse storage areas.

• Pack Sizes: 5 litres (Nominal Volume)
• Colours: Tintable

Guard SCF is a single pack solvent-based one coat product for suitably prepared steel. Fast drying for optimum throughput.

Pack Sizes: 5 litres and 20 litres

Colours: Full tint-able colour range.

Gloss Level: Matt, Satin, Gloss

Guard HBV is a single pack solvent-based one coat product for suitably prepared steel, optimised for use onto galvanised steel and aluminium.

Pack Sizes: 5 litres, 20 litres (Nominal Volumes)

Colours: Full tintable colour range. All RAL & BS4800 colours and specials on request.

Gloss Level: Matt, Satin, Gloss

Please note: This product is now discontinued. Please contact us for a suitable alternative.

Guard BT single pack solvent-based black bitumen paint is designed for water-proofing brick, stone, timber, concrete, metal and steel.

• Pack Sizes: 5 litres and 20 litres
• Colour: Black

Guard HTB single component high temperature paint for interior use on suitably prepared steel/metal. Temperature resistant up to 600°C.

Pack Size: 5 litres

Colour: Black

Gloss Level: Matt, Sheen