Steel Fabricators

Guard HTB single component high temperature paint for interior use on suitably prepared steel/metal. Temperature resistant up to 600°C.

Pack Size: 5 litres

Colour: Black

Gloss Level: Matt, Sheen

Guard HBV is a single pack solvent-based one coat product for suitably prepared steel, optimised for use onto galvanised steel and aluminium.

Pack Sizes: 5 litres, 20 litres (Nominal Volumes)

Colours: Full tintable colour range. All RAL & BS4800 colours and specials on request.

Gloss Level: Matt, Satin, Gloss

Guard SCF is a single pack solvent-based one coat product for suitably prepared steel. Fast drying for optimum throughput.

Pack Sizes: 5 litres and 20 litres

Colours: Full tint-able colour range.

Gloss Level: Matt, Satin, Gloss

Guard EP single pack solvent-based, quick drying, high build, zinc phosphate primer for various substrates including metal, steel, fabrication works.

Pack Sizes: 1 litre, 2.5 litres, 5 litres and 20 litres

Colours: Red Oxide and Grey

Gloss Level: Matt

Finish coat product to give a modelled or “hammer” finish effect.

A surface tolerant product for mixed metal surfaces, where minimal preparation can be carried out. Two component for optimum protection.

Pack Sizes: 5 litres

Colours: Tintable

Gloss Level: Matt and Satin

 

A surface tolerant product for mixed metal surfaces, where minimal preparation can be carried out. Two component for optimum protection

Pack Sizes:  4 litre unit – Semi-Gloss and Gloss

Colours: Fully Tint-able

Finishes; Semi-Gloss and gloss

A quick drying single coat product, designed to be both a primer and finish in one.

Pack Size: 5 Litres and 20 Litres

Colours: Fully tint-able

Gloss Level: Available in a semi-gloss finish as standard

Guard HTS high temperature silver coating. Silicone alkyd interior paint for suitably prepared steel/metal. Temperature resistant up to 550°C.

Pack Size: 5 litres

Colour: Silver

Gloss Level: Sheen

Single pack, one coat product for suitably prepared steel. Satin, Matt or Gloss Available in 5 litre units, fully tint-able.

Pack Size: 5 Litres

Colour: Fully tint-able colour range

Finish: Satin, Matt, Gloss

Guard T-Wash mordant solution, also known as Etch, is designed for treating galvanised steel before painting.

• Pack Size: 5 litres
• Colour: Blue, turning black once applied

Jotun Marathon IQ is a practically solvent free, abrasion resistant, two-pack epoxy coating.

Jotun Resist 86 is a two-component, quick curing, zinc-rich ethyl silicate based coating.

Jotun Steelmaster 1200WF is a single pack waterborne acrylic thin film intumescent coating.

Jotun Steelmaster 60 SB is a single pack solvent based acrylic thin film intumescent coating.

A one component waterborne acrylic thin film intumescent coating. Independently approved for fire protection of structural steel exposed to cellulosic fire. Can be used as mid coat or finish coat in atmospheric environments.

Jotun Pilot WF is a one component water borne acrylic emulsion coating.

Jotun Penguard Plus a quick drying, high solids, VOC compliant, high molecular weight two-component epoxy coating.

Marathon 550 is a surface-tolerant, abrasion-resistant epoxy primer for high corrosivity areas. Marathon 550 is suitable for environments with very high corrosivity, such as splash zones or tidal zones. Marathon 550 is surface-tolerant and can be applied on moist substrates and has excellent resistance to cathodic disbonding.

A two component polyamine cured epoxy coating. It is a high build, solvent free, glass flake reinforced product. Can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments.

A two-component surface tolerant, high solids epoxy mastic coating for general and marine use.

Pack Size: 10 litres

Jotun Jotamastic 87 is a two-pack surface tolerant, high solids, abrasion resistant, polyamine cured epoxy mastic coating which may be applied in high film thickness.

Pack Size: 4.7L and 18.7L

Colour: Black, Green, Grey, Off-white, Red and Yellow

 

A two component chemically curing acrylic polysiloxane coating. It is a high solids product. It has a high gloss finish. It has excellent gloss and colour retention. It has very good mechanical properties and chemical resistance.

Pack Size: 5 Litres and 20 Litres

Colours: Fully tint-able

This is a two component ceramically reinforced polyamide cured zinc rich epoxy coating. It is a fast drying, high solids, high zinc dust containing product.