All – Page 24

Mapeproof Swell is a single component hydrophilic paste, used in repair and waterproofing operations. It may be applied on damp or uneven surfaces, and may be used at any temperature and with any kind of water which infiltrates or seeps through.

Idrostop Mastic adheres perfectly to surfaces, including on slightly damp surfaces, as long as they are clean and sound. Its creamy consistency compensates for slight differences in the flatness of substrates where Idrostop is to be applied. When the product is extruded from the cartridge, it forms a paste that may be applied on horizontal and vertical surfaces. At +5°C to +35°C it sets by reacting with the moisture in the air to form a plastic bead.

Mapei shower waterproofing is flexible and anti-fracture. Apply before the installation of ceramic tiles or stone material. Some application examples: Waterproofing walls and floors in bathrooms and shower cubicles before laying ceramic tiles, natural stone and mosaic. Waterproofing kitchen walls and floors, and work tops before laying ceramic tiles and natural stone.

Epoxy paint used for the protection of floors, reservoirs and concrete pipes in contact with aggressive chemical agents such as acids, caustic solutions and hydrocarbons. Available in a 5kg unit. Technical Description Mapecoat I 24 is a two-component epoxy-resin.

Two component solvent-free epoxy adhesive for construction joints and for monolithic sealing of cracks in screeds.

Once mixed, Epojet LV and Epojet LV 40 become a very fluid liquid that can easily penetrate even in microcracks. Epojet LV and Epojet LV 40 polymerise without any significant amount of shrinkage, also on wet surfaces and once hardened are waterproof and resist chemical agents present in the air. They also have very good insulating properties and high mechanical strength.  

Rapid repair work on deteriorated concrete beams, pillars, buffer walls, cornices, edges of balconies and structural members and elements that require the use of mortar with high mechanical performance characteristics. After mixing, the product forms a mortar with good workability and with setting and hardening times that can be modulated by adding Mapetard ES. It is applied by trowel in a single layer from 3 to 40 mm thick to repair and smooth over concrete.

Two-component, high solids polyamine adduct cured zinc rich epoxy primer Available as 8Litre can as RedGrey colourway

Guard Epx-2K is a two pack epoxy coating for concrete and steel.

Pack Size: 5 Litre (4+1 litre)

Colour: Full tint-able colour range.

Finish: Satin or Gloss

One-component, waterborne acrylic zinc phosphate primer.

A two-pack water-based epoxy floor coating with excellent adhesion to concrete, wood and other surfaces providing attractive, hard-wearing dust-free finishes. Resuflor WB Clear can act as a curing membrane to increase the hardness of concrete by allowing full hydration of cement and can be applied to new concrete, 7 days after being poured.

SigmaDur 541 is a two-component, high-gloss, VOC-compliant epoxy acrylic finish.

Pack Size: 4 Litres and 20 Litres

Colours: Fully tint-able

Finish: Gloss

two-pack high solids epoxy resin bonding and priming coat. Available in a clear gloss finish. 5kg or 30kg unit.

A two-component epoxy resin primer that is tolerant of residual moisture in concrete floors. Available in a 1kg, 5kg or 15kg unit

A two-pack water-based epoxy coloured floor coating. Available in 5kg and 10kg, and in many different colours  

Resuflor HB (formerly known as Resucoat HB) is a two-pack, high performance floor coating, providing a hygienic, easy-clean and hard-wearing resin floor system. Available in 5kg and 25kg packages, in many colours

Resupen™ WB is a UV stable water-based polyurethane floor and wall finish for application onto concrete, plaster and wood or as a seal coat. Available in 5.23kg, 5.65kg and 6.38kg, in many colours This product is for professional use only. As of 2023, adequate training is essential before use. Please visit:https://www.safeusediisocyanates.eu/to learn more

Two pack polyurethane high build floor coating Available in 18.84kg tub

A high performance, two pack polyurethane floor and wall coating which has good chemical resistance and colour stability.

A self smoothing epoxy resin seamless floor finish with low VOC content, with non-dusting aggregates designed to provide a flat hard wearing gloss finish

Self-levelling epoxy resin seamless floor finish Available as 29.52kg in many colours

A heavy duty, epoxy resin floor screed, with high chemical resistance and strong colour definition Available as 22.5kg and 45kg, in many colours

A two-pack epoxy grout. Available as 5kg and 30kg

Water based four component polyurethane floor screed. Available as 30.1kg This product is for professional use only. As of 2023, adequate training is essential before use. Please visit:https://www.safeusediisocyanates.eu/to learn more