All – Page 26

Ready to use, flexible, ultra rapid drying waterproofing membrane for interior and exterior use in showers, wet rooms and on balconies*. Can be tiled after 4 hours.

Fast drying flexible liquid tanking membrane for the interior waterproofing of bathroom and shower walls and floors before installing ceramic tiles and natural stone.

Two-component, flexible cementitious mortar for protecting large concrete structures subjected to high stress. Available in a 32kg unit.

Two-component, high-flexibility cementitious mortar (with crack-bridging> 2 mm), applied by trowel or with a roller, for waterproofing balconies, terraces, bathrooms and swimming pools.

Two-component rapid-drying elastic cementitious mortar for waterproofing terraces and balconies, including at low temperatures and on substrates not completely dry Available as 32kg package (component A 24kg + component B 8kg)

Dust-repellent acrylic primer, consolidator and adhesion promoter in water dispersion for masonry, render and screeds and when carrying out strengthening and waterproofing work. Available as 5kg or 10kg tubs

Available as 6kg or 25kg bags Bulk powder or liquid water-repellent for cementitious mortar

Ready-to-use flexible liquid membrane with fibres for continuous waterproofing layers on exposed external surfaces. Available as 5kg or 20kg tubs, in multiple colours

Available as 20kg tub. Ready-mixed, high-elasticity, quick-drying, UV-resistant liquid waterproofing membrane.

Available as 6kg tubs Synthetic resin-based primer in solvent solution to improve the adhesion of liquid elastic membranes onto existing bituminous membranes

Two-component, epoxy-polyurethane sealant with high chemical and mechanical strength This product is for professional use only. As of 2023, adequate training is essential before use. Please visit:https://www.safeusediisocyanates.eu/to learn more.

Two-component cementitious mortar for finishing concrete surfaces. Available 30kg units.

Available as 10kg tubs Three-component acid and wear-resistant epoxy mortar for floors.

Available in 25kg plastic drums Surface treatment in liquid form made from lithium silicate with a consolidating effect, for new or old concrete floors and concrete surfaces broadcast with quartz sand.

Synthetic rubber latex admixture to improve mechanical strength of cementitious mixes for screeds and renders. Also for producing bonding slurries for Mapei Screeds and splatterdash coats for renders (eg Nivoplan).

One-component premixed cementitious mortar. Available in 25kg bags.

Mono-filament, virgin polypropylene fibres with a length of 12mm, for concrete

One-component, ready-to-use, fibre-reinforced, cementitious mortar, applied using wet or dry application spraying technique with extra fast hardening. Available in 25kg bags

Pre-blended, ready to use, fast-setting and drying hydraulic binder for shrinkage compensated screeds. Available as 25 kg bags

Medium strength (40 MPa) thixotropic mortar for the repair of concrete. Available in 25kg bags

Special quick-setting and drying (24 hours), controlled-shrinkage hydraulic binder for screeds. Available in 20kg bags.

Two-component, self-levelling epoxy formulation used to form strong, dissipative coatings. Available as a 20kg package (Comp A 16kg, Comp B 4kg).

Flowable, shrinkage compensated, quick setting and hardening, high-ductility cementitious mortar, applied at temperatures as low as -5°C, with stiff steel fibres, for repairing concrete. Available in a 25kg unit.

Quick-setting, shrinkage-controlled, thixotropic mortar for repairing concrete.