- DESCRIPTION
- Related Products
- Datasheet
- Reviews
DESCRIPTION
Guard ELC is a fully tint-able, elastomeric, one component, water-based metal roofing/cladding coating with unequalled corrosion protection.
No primer required, 15+ years protection! Warranties available – 15 years and 20 years.
Product Description:
A water based one component anti-corrosion coating. Acrylic coating with elastomeric properties which provides excellent corrosion protection.
Advantages:
• Long Life – Over 15 years in C5-M coastal and industrial environments. 25 years in C4 heavy industrial environments. • Dry fall product; means that the overspray turns to dust before hitting the ground • Surface Tolerant Primer/Finish. No need for abrasive blast cleaning, just prepare the surface using high pressure water jetting. • U.V and Impact-resistant • Anticorrosive and Waterproof – The perfect product for the renovation of metallic roofs in aggressive industrial locations. • Zero solvent emissions – Low odour and environmentally compliant. • 200% Elasticity – Allows expansion and contraction of metal panels. A flexible fleece can be used to reinforce areas with overlaps, seams and joints. • Easy Cleaning – Simply put the gun in water during breaks
Typical Uses:
This coating can be used as a primer and/or finishing coat on many subtrates including roofing, cladding, steel, iron, special alloys, metallised iron and steel, galvanising, copper, lead, zinc aluminium and more.
Application process:
Guard ELC should be applied ideally using airless spray – brush and roller can be used although please contact us for more advice on using it with these methods. Temperatures should be between 8°C and 55°C whilst the Guard ELC is being applied. After approximately 90 minutes the paint will be touch dry and suitable to re coat after 24 hours.
Technical Data:
Theoretical Consumption Approx: 300-400g/m² per coat (total consumption: 800g/m²) Volume Solids: 55-57% Dry Film Thickness (DFT): 130-175μm Wet Film Thickness (WFT): 230-310μm Flash Point: Not flammable VOC Content: Maximum 8g/litre
Contact Us:
For further advice regarding the use of this product, technical support or a quotation please contact us; +44 (0)1937 586311
Related Products
-
Guard MSP-2K- Matt and Satin
A surface tolerant product for mixed metal surfaces, where minimal preparation can be carried out. Two component for optimum protection.Pack Sizes: 5 litres
Colours: Tintable
Gloss Level: Matt and Satin
-
Guard SCF
Guard SCF is a single pack solvent-based one coat product for suitably prepared steel. Fast drying for optimum throughput.Pack Sizes: 5 litres and 20 litres
Colours: Full tint-able colour range.
Gloss Level: Matt, Satin, Gloss
-
Guard HBV
Guard HBV is a single pack solvent-based one coat product for suitably prepared steel, optimised for use onto galvanised steel and aluminium.Pack Sizes: 5 litres, 20 litres (Nominal Volumes)
Colours: Full tintable colour range. All RAL & BS4800 colours and specials on request.
Gloss Level: Matt, Satin, Gloss
Reviews
There are no reviews yet.