PPG Sigmacover 380

PPG SigmaCover 380?is a universal epoxy anticorrosive primer, based upon pure epoxy technology. Ideal for use on Ballast Tanks, Decks, Topside, Superstructure and Hull.

Product Features and Benefits

• General-purpose epoxy primer in protective coating systems for steel
• Universal pure epoxy primer system suitable for Ballast Tanks, Decks, Topside, Superstructure and Hull
• Good abrasion resistance for dedicated areas of application
• Suitable for immersion service (ballast tanks, outside shell)
• Good anticorrosive properties and water resistance
• Good flexibility
• Resistant to well designed cathodic protection
• Good drying and curing property
• Suitable for both newbuilding and maintenance applications
• Colours available: grey, green, yellow green, light grey
• Gloss level: Eggshell

Method of Application

• Airless spray
• Brush/Roller

Note:? Brush - for stripe coating and spot repair only. Surface should be dry and free from any contamination. Please refer to the product Data Sheet for surface preparation, mixing and application instructions.  

Overcoating

Please?contact us?for suitable topcoats for PPG SigmaCover 380.  

Thinner

Airless Spray: PPG Thinner?91-92 Volume of Thinner: 0 - 10% depending on required thickness and application conditions. Refer to product Data Sheet for further details.  

Cleanup

• PPG?Thinner?90-53

Safety Precautions

Adequate ventilation must be maintained during application and curing (please refer to Information Sheets 1433 and?1434). For paint and recommended thinners see Information Sheets 1430, 1431 and relevant Material Safety Data Sheets. This is a solvent-borne paint and care should be taken to avoid inhalation of?spray?mist or vapour, as well as contact?between the wet paint and exposed skin or?eyes. Please refer to the product Data Sheet and Material Safety Data Sheets for full details regarding the safe use of?this?product. We also offer free?technical advice - click here to contact us.