PPG SigmaCover 690
PPG SigmaCover 690
Brand: PPG
Two component high solids aluminum pigmented polyamine cured modified epoxy primer/coating.
Buy Now
- DESCRIPTION
- Related Products
- Datasheet
- Reviews
DESCRIPTION
PPG SigmaCover 690 is a two-component high solids, self-priming, low VOC, aluminium pigmented polyamine cured modified epoxy primer/coating.
Product Features and Benefits
- Primer/coating designed for maintenance
- Low VOC
- Good flow properties
- Self priming coating tolerant to lower grades of steel preparation
- Compatible with most aged, good adhering coatings
- Good recoatability with epoxy and polyurethane paints
- Good curing at temperatures down to 5°C (41°F)
- Good impact and abrasion resistance
- If the substrate temperature drops below 5°C (41°F) until 0°C (32°F), the winter grade type should be used (see 7414WG)
Recommended Substrate Conditions and Temperatures
Atmospheric exposure conditions
- Steel: blast cleaned to ISO-Sa2 or power tool cleaned to ISO-St2 for good corrosion protection
- Steel with approved shop primer: sweep blasted to SPSS-Ss or power tool cleaned to SPSS-Pt2
- Existing sound coating systems: sufficiently roughened, dry and cleaned
Immersion in water
- Steel: blast cleaned to ISO-Sa21⁄2
- Steel with approved zinc silicate shop primer: sweep blasted to SPSS-Ss or power tool cleaned to SPSS-Pt3
Substrate temperature
- Substrate temperature during application and curing should be above 5°C (41°F)
- Substrate temperature during application and curing should be at least 3°C (5°F) above dew point
Application
- Air Spray
- Airless Spray
- Brush/Roller
Please refer to Data Sheet for application instructions.
Colour and Gloss Level
Colours: Aluminium light and dark Finish: Semi-gloss
Recommended Thinner
Cleanup
Safety Precautions
- For paint and recommended thinners see Information Sheets 1430, 1431 and relevant Material Safety Data Sheets
- This is a solvent-borne paint and care should be taken to avoid inhalation of spray mist or vapor, as well as contact between the wet paint and exposed skin or eyes
Contact Us
For further advice regarding the use of this product, technical support or a quotation please contact us.
Related Products
-
PPG SigmaCover 456 HS
A two component high solids polyamide cured recoatable zinc phosphate epoxy primer/coating for steel and concrete structures in atmospheric exposure. Curable in low temperatures down to -5°C (23°F).- Colour: Wide range of colours available
- Gloss Level: Eggshell
-
PPG Sigmacover 240
(Product Discontinued) A two-component, multi-purpose phenalkamine epoxy coating for industrial and marine applications. -
PPG Sigmacover 380
Universal epoxy anticorrosive primer for steel. Ideal for use on Ballast Tanks, Decks, Topside, Superstructure and Hull.- Colour:?Grey, green, yellow green, light grey
- Gloss Level: Eggshell
-
PPG SigmaCover 2 Aluminium
Now known as PPG SigmaCover 350 a two-component, high-build polyamide cured anticorrosive epoxy primer/coating ideal for use in the marine and protective coatings sectors.
Reviews
There are no reviews yet.