Guard STV- Stoving paint

Stoving paint for the protection and decoration of steel components, fabrications and other suitably prepared substrates.

Where to use

Principally intended for prepared mild steel substrates, ferrous and suitable prepared non-ferrous metal substrates, but excluding zinc/galvanized iron.

Technical Information

Colours: Full tintable colour range. All RAL & BS4800 Colours and specials on request Pack Size: 5 litre, 20 litre Gloss Level: Gloss. Resin Type: Alkyd Components: Single Component Generic Type: Solvent-based Theoretical Spreading Rate: (approx) 13m² per litre based on 50μm wft Volume Solids: (approx) 42-43% Dry Film Thickness: (DFT) 20­22μm Wet Film Thickness: (WFT) 50μm Flash Point: 23-32°C VOC Content: 600gms/litre Temperature Resistance: 200°C

Application

Ensure surfaces are clean, dry and free from grease and other contamination before coating. Thoroughly degrease and where applicable, abrade to remove rust and promote good adhesion of the coating. For optimum corrosion protection, mild steel should be blast cleaned to Sa2.5 or power tooled to achieve ST3. Complex structures may be more effectively cleaned by HPWJ (high pressure water jetting). Substrate temperature during application and curing should be above 5°C (41°F). Substrate temperature during application and curing should be at least 3°C (5°F) above dew point.

Recommended Thinner : Guard Solvent A