UltraScape Eco-Bed

UltraScape Eco-Bed (formerly Pro-Bed HS Eco) is an environmentally friendly fine bedding mortar manufactured to meet and exceed the strict requirements of BS 7533. It contains 20% recycled materials, significantly reducing the consumption of virgin aggregates. It is ideal for schemes looking to achieve an ‘excellent’ CEEQUAL award, or where a BREEAM assessment is to be conducted on your building. 

Pack Size: 25kg

Colour: Grey  

Product Benefits

• Can be laid from 10mm – 100mm
• Shrinkage compensated
• BS 7533 compliant
• Small contractor friendly units
• Pre-blended – just add water
• Open to pedestrian traffic in 12 hours
• Open to vehicular traffic in 24 hours
• Long-term durability
• BS 7533 Compliant Mortar Paving Installation System

Yield

13.36 litres (approximately) per 25kg bag  

Product Applications

UltraScape Eco-Bed is specifically formulated to meet and exceed the strict demands of BS 7533. The product provides a perfect bound base for natural stone paving and cobbles, concrete paving, flags, block paving and 20mm Porcelain tiles, which, once laid with UltraScape Eco-Bed are able to accept foot traffic after just 12 hours and vehicular traffic after 24 hours. The material is also not subject to environmental erosion, which can lead to increased point loads on slabs and consequent breakage.  

Preparation

It is of vital importance that the supporting layer whichis to receive UltraScape Eco-Bed is stable and not liable to settlement or heave. Supporting structures must be cleaned, pre-soaked and all ponded water must be removed prior to application. To promote bond, the supporting layer can be primed using UltraScape Pro-Prime slurry primer. Please note that this product is suitable only for bound/rigid construction, not for unbound/flexible applications.  

Mixing

Add between 2.4 and 2.8 litres of clean water to a suitable mixing vessel. Slowly add the contents of one 25kg bag. Mix mechanically for a minimum of 3 minutes and a maximum of 5 minutes. Do not add extra water or part mix bags.  

Priming

To increase overall product performance, prime the supporting layer with UltraScape Pro-Prime slurry primer before applying UltraScape Eco-Bed. Priming the road-base is not a requirement of the British Standard for pavements constructed on a bound base. It is of vital importance that the underside of all paving elements are primed in accordance with BS 7533. The bonding characteristics of UltraScape eco-bed will only be achieved when the product is used in conjunction with UltraScape Pro-Prime slurry primer.  

Application Video

https://www.youtube.com/watch?v=YHODkLj5lOQ&t=245s&ab_channel=NewGuardCoatingsGroup  

Technical Information

UltraScape eco-bed is formulated from selected cements and graded fillers. The pre-blended fine bedding concrete is supplied in 25kg bags or alternatively, for those large projects, in 30 tonne bulk silos. The product can be laid from 10mm to 100mm in one pass with greater depths achievable using successive layers. The material mixes easily on-site with the addition of water and provides a compressive strength of 45N/mm2 after 28 days complying fully with BS 7533. This material should not be used in temperatures below 5oC.  

Contact Us

For further advice regarding the use of this product, technical support or a quotation please contact us.