Speak to a Coatings Expert Today
Need help specifying a coating system or placing an order? Get a free, no-obligation recommendation for your project.
Machinery Coatings Warrington | Industrial Machinery Paint | New Guard Coatings
Industrial machinery is often exposed to demanding working conditions.
Manufacturing equipment, engineering machinery and industrial assets can be affected by corrosion, mechanical wear, oil, grease, chemicals and general environmental exposure. Over time, these conditions can affect both the appearance and condition of machinery.
New Guard Coatings supplies machinery coatings in Warrington for manufacturers, engineering companies and industrial businesses across the North West.
Whether you are refurbishing existing machinery, protecting newly fabricated equipment or carrying out ongoing maintenance, selecting the correct coating system is an important part of protecting suitable metal surfaces.
Protective Coatings for Industrial Machinery
Different types of machinery have different coating requirements.
A machine operating inside a clean manufacturing environment may require a completely different system from equipment exposed to moisture, chemicals or outdoor weather conditions.
Suitable applications can include:
- Manufacturing machinery
- Engineering equipment
- Production machinery
- Machine housings
- Fabricated equipment
- Metal frames
- Equipment enclosures
- Industrial components
- Processing equipment
- Maintenance machinery
The correct coating system should be selected based on the substrate, operating environment and expected exposure.
Why Coat Industrial Machinery?
Machinery coatings can provide both practical and visual benefits.
Depending on the application and system selected, a protective coating can help to:
- Protect metal surfaces
- Improve resistance to corrosion
- Protect against environmental exposure
- Improve the appearance of machinery
- Support maintenance and refurbishment programmes
- Provide a consistent finish
- Help extend the service life of suitable assets
The level of protection achieved will depend on the surface preparation, coating system and conditions in which the machinery operates.
Machinery Refurbishment & Maintenance
Replacing industrial machinery can be expensive and disruptive.
Where the equipment remains structurally and mechanically suitable, refurbishment may provide an opportunity to improve its appearance and protect exposed surfaces.
A machinery refurbishment project may involve:
- Inspecting the existing equipment
- Assessing corrosion and coating damage
- Cleaning and degreasing surfaces
- Removing loose or failing coatings
- Preparing exposed metal
- Applying a suitable primer where required
- Applying the selected protective coating system
Each project should be assessed individually, particularly where machinery is exposed to oils, chemicals, heat or other demanding conditions.
Machinery Coatings for Manufacturing Businesses
Manufacturing facilities rely on machinery operating consistently.
Equipment can become exposed to a combination of:
- Oil and grease
- Moisture
- Dust
- Industrial contamination
- Mechanical damage
- Abrasion
- Cleaning processes
- General wear
The right preparation and coating system can help protect suitable external surfaces while providing a professional and durable finish.
Before applying any coating, the equipment should be assessed to determine its substrate and current condition.
Preparing Machinery Before Coating
Surface preparation is critical to the performance of a machinery coating.
Before coating, inspect the machinery for:
- Oil and grease
- Dirt and dust
- Rust and corrosion
- Loose coatings
- Flaking paint
- Moisture
- Surface damage
- Previous repairs
Industrial machinery can often have significant oil and grease contamination, particularly around moving parts and areas exposed to lubricants.
These contaminants should be suitably removed before coating.
Depending on the surface condition, preparation may involve:
- Degreasing
- Cleaning
- Mechanical abrasion
- Wire brushing
- Power-tool preparation
- Abrasive blasting
The appropriate method will depend on the substrate and the requirements of the selected coating system.
Corrosion Protection for Machinery
Corrosion can affect machinery that is exposed to moisture and demanding industrial conditions.
Suitable anti-corrosion coating systems may be used on compatible:
- Steel machinery
- Fabricated components
- Metal housings
- Equipment frames
- External machinery surfaces
- Industrial equipment
Where corrosion is already present, loose rust and corrosion products should be addressed as part of the preparation process.
Applying a coating directly over poorly prepared corrosion can increase the risk of premature coating failure.
The correct preparation and primer system should therefore be considered before selecting a topcoat.
Coatings for Fabricated Machinery & Equipment
Newly manufactured machinery and fabricated equipment may also require protective coatings before being installed or supplied to customers.
Coating considerations can include:
- Substrate type
- Required corrosion protection
- Indoor or outdoor use
- Required colour
- Application method
- Production timescales
- Drying requirements
- Required durability
For manufacturers and fabricators, coating selection can also affect the efficiency of the production process.
The number of coating stages, application time and drying requirements should all be considered alongside the required level of protection.
Fast-Drying Coatings for Machinery
Production and maintenance downtime can be an important consideration for industrial businesses.
Where appropriate, fast-drying coating systems may help reduce the time required between preparation, application and returning suitable equipment to service.
However, drying times can vary depending on:
- The coating system
- Film thickness
- Temperature
- Humidity
- Application conditions
Always follow the product-specific application and drying requirements.
The fastest-drying coating is not necessarily the most suitable system for every machinery application.
Machinery Coatings for Engineering Facilities
Engineering businesses often operate machinery and equipment in demanding working environments.
Potential applications can include:
- Machine frames
- Engineering equipment
- Fabricated assemblies
- Production equipment
- Workshop machinery
- Metal components
The coating system should reflect the conditions within the facility.
Considerations may include mechanical wear, chemical exposure, temperature and regular cleaning.
Machinery Paint Colours & Finishes
Machinery coatings can be selected in a range of colours and finishes, depending on the product system and application.
Colour can be important for:
- Brand consistency
- Equipment identification
- Maintenance projects
- Safety requirements
- Refurbishment work
Where a specific colour is required, the coating system should be assessed to ensure the required performance is maintained alongside the desired appearance.
Machinery Coatings for Warrington Manufacturers
Warrington and the wider North West are home to a diverse range of manufacturing and engineering businesses.
These businesses use machinery and equipment across industries including:
- Manufacturing
- Engineering
- Energy
- Logistics
- Construction
- Infrastructure
- Food production
- Industrial processing
New Guard Coatings can help businesses identify suitable protective coating solutions for compatible machinery and equipment applications.
Industrial Machinery Coatings Across the North West
Our North West operations support businesses throughout:
- Warrington
- Birchwood
- Runcorn
- Widnes
- St Helens
- Manchester
- Liverpool
- Cheshire
- Greater Manchester
- Merseyside
Whether the project involves machinery refurbishment, new equipment or an ongoing maintenance programme, the correct coating system should be selected based on the specific application.
Choosing the Right Machinery Coating
There is no single machinery paint suitable for every industrial application.
Before selecting a system, consider:
The substrate
Is the machinery manufactured from mild steel, galvanised steel, aluminium or another material?
The environment
Will the equipment operate indoors or outdoors?
Surface condition
Is the machinery new, previously coated, rusty or contaminated?
Exposure
Will the surface be exposed to:
- Moisture?
- Oil?
- Chemicals?
- Abrasion?
- UV exposure?
- Temperature changes?
Application requirements
How will the coating be applied?
Available application methods can influence which system is most appropriate.
Required downtime
How quickly does the machinery need to return to service?
Application and drying requirements should be considered during planning.
Frequently Asked Questions
What is the best coating for industrial machinery?
The best coating depends on the machinery's substrate, working environment and expected exposure. A coating suitable for indoor equipment may not be appropriate for machinery exposed to weather, chemicals or heavy industrial conditions.
Can old machinery be repainted?
In many cases, suitable machinery can be refurbished and repainted. The existing surface should first be assessed for corrosion, contamination and failing coatings.
How do you prepare machinery for painting?
Preparation may involve cleaning, degreasing, removing loose coatings, addressing corrosion and mechanically preparing the surface where required.
Do machinery coatings protect against corrosion?
Suitable anti-corrosion coating systems can help protect compatible metal machinery from environmental exposure and corrosion.
Can you coat newly manufactured machinery?
Yes. Newly fabricated or manufactured machinery can be coated using a suitable system selected for its intended environment and performance requirements.
Do you supply machinery coatings in Warrington?
Yes. New Guard Coatings supplies industrial and protective coating solutions for suitable machinery and equipment applications across Warrington and the wider North West.
Machinery Coatings in Warrington
Industrial machinery can represent a significant investment for manufacturing and engineering businesses.
Protecting suitable equipment from corrosion, wear and environmental exposure can form an important part of an effective maintenance or refurbishment programme.
New Guard Coatings supplies machinery coatings in Warrington and across the wider North West, helping manufacturers and engineering businesses identify suitable protective coating solutions for industrial machinery and equipment.
Contact New Guard Coatings to discuss your machinery coating requirements.
