All – Page 23

A one component high quality bitumen based coating with fillers and special flow additives. For refurbishing car parks, driveways and footpaths.

RD-Sunguard is a high perfromance solar reflective coating - Cool Roof system.

Pack Size: 5L / 20L

Colour: White

Sherwin Williams Resuflor LM is a two pack coloured epoxy high build line marking. Available in a 2.5kg unit.

Sherwin Williams Resuflor WB is a two-pack water-based epoxy coloured floor coating. Also available in clear.

Sherwin Williams FasTop Multi SL45 is a polyurethane cement self-levelling resin floor screed designed to provide very heavy-duty usage with resistance to thermal shock, abrasion and chemical attack in aggressive industrial environments. This product is for professional use only. As of 2023, adequate training is essential before use. Please visit:https://www.safeusediisocyanates.eu/to learn more

Sherwin Williams Sher-Crete BU is a cementitious pumped industrial underlayment base screed.

Sherwin Williams Fastop Multi WR is a four pack polyurethane coving mortar. This product is for professional use only. As of 2023, adequate training is essential before use. Please visit:https://www.safeusediisocyanates.eu/to learn more

Malech is a micronized acrylic resin based primer in water dispersion that, once applied on the surface, penetrates better than traditional water based primers.

Mapefer 1K is a one-component mortar prepared according to a formula developed based on polymers in powderform, cementitious binders and corrosion inhibitors to be applied on reinforcing rods to prevent rust formation.

R4-class, rapid-setting, shrinkage-compensated, thixotropic, fibre-reinforced, cementitious mortar, applied in a single layer from 3 to 40 mm thick, for repairing and smoothing concrete.

Shrinkage-compensated, fibre-reinforced mortar for concrete repair.

Mapeflex PU 45 FT is a one-component, thixotropic, easy-to-apply, polyurethane-based sealant and adhesive with a high modulus of elasticity, made according to a formula developed in MAPEI’s own R&D laboratories and meets the requirements of ISO 11600 class F20 HM. Solvent-free, with a low impact on the environment.  

Mapelastic Foundation is a fantastic product which is completely waterproof against positive pressure, and is waterproof against negative pressure of up to 1.5 atm (15 m column of water). Once cured, it is resistant to soluble salts which are present in sea water or in the ground, such as chlorides and sulphates.

Ultra-quick setting, smoothing, wearing screed for high abrasion-resistant Industrial floor coverings at a thickness from 5-40mm.Ultratop Industrial may remain on view as a finished floor surface due to its high mechanical strength.

Ready to use version of Topcem. Ready-to-use, normal setting, quick-drying mortarwith high thermal conductivity. Available in a 25kg unit.

Topcem is a special hydraulic binder which, when mixed with graded aggregates and water, can produce an early drying high strength screed ready to receive floor finishes between 24hrs and 4 days. Topcem is defined within BS 8204 -1 section 5.1.3 part f.  Suitable for indoor and outdoor use.

Fibre reinforced self-levelling compound designed for the renovation/refurbishment of existing floor substrates. For use in both commercial and domestic situations. Can be used from 3-40mm on concrete, screed, stone, ceramic, timber.

Osmotic cementitious mortar suitable for contact with drinking water, for waterproofing masonry and concrete structures.

Pure, mould-resistant, acetic silicone sealant with BioBlock® technology for movements up to 25%.

One-component flexible, thixotropic, quickhardening sililated polymer-based hybrid sealant and adhesive with a high modulus of elasticity. Also suitable for damp substrates.

Mapeflex PU 45 FT may be used to bond most building materials, for example cement and cement-based products, cellular concrete, bricks, steel, copper, aluminium, general pre-painted surfaces, glass, mirrors, gypsum, wood and woodbased materials, ceramics, clinker, insulating material, plastics such as PVC, acrylic glass and fibreglass. The high bonding characteristics and rapid-hardening properties of Mapeflex PU 45 FT make it suitable for joining various materials and for bonding on a wide range of substrate materials.

Lamposilex is a pre-blended powder binder composed of high-strength cements and special admixtures in a formula.

Plastimul meets the requirements for polymer modified bituminous thick coatings, in compliance with EN 15814. Plastimul is a solvent-free paste consisting of selected water-emulsified bitumens, special fine-graded aggregates and admixtures, manufactured according to a formula developed in MAPEI Research & Development Laboratories.