PPG – Page 4

A two-component, high solids, high-build, polyamide cured epoxy coating for steel and concrete structures exposed to atmospheric land or marine conditions. Good drying and curing properties at low substrate temperature, down to –5°C (23°F).

• Colour: Available in MIO and a selected range of colours
• Gloss Level: Flat

A two-component, high-build, polyamide-cured recoatable epoxy coating for steel and concrete structures exposed to atmospheric land or marine conditions. Anticorrosive, water and mild chemical resistant, and cures even at temperatures down to -10°C (14°F).

• Colour: Standard and custom colours available
• Gloss Level: Semi-gloss

A two component high solids polyamide cured recoatable zinc phosphate epoxy primer/coating for steel and concrete structures in atmospheric exposure. Curable in low temperatures down to -5°C (23°F).

• Colour: Wide range of colours available
• Gloss Level: Eggshell

A two-component, high-build, micaceous iron oxide-pigmented, polyamide-cured recoatable epoxy coating. Ideal for steel and concrete structures exposed to atmospheric land or marine conditions, and curable at low temperatures down to -10°C (14°F).  

(Product Discontinued) A two-component, chemical-resistant finish, based on polyamide cured epoxy resins.

Please note; this product is now discontinued. For a suitable alternative, please contact us on 01937 586311 or alternatively, contact us at uksales@newguardcoatings.com A two-component, micaceous iron oxide-pigmented, polyamide-cured epoxy primer/sealer/coating for weathered-, cleaned-, zinc-rich primers and metal-sprayed steel. Resistant to high temperatures up to 200°C (390°F) in dry atmospheric exposure conditions.  

Now known as SigmaCover 555 a two-component, polyamide-cured anticorrosive, antifouling, water-resistant epoxy tie-coat ideal for underwater systems.

• Colour: Black, grey
• Gloss Level: Eggshell

Formerly SigmaCover 525. A two-component, polyamide-cured anticorrosive, antifouling, water-resistant epoxy tie-coat ideal for underwater systems.

• Colour: Black, grey
• Gloss Level: Eggshell

(Product Discontinued) A two component polyamide cured epoxy sealer.

A two-component, surface-tolerant, high-build polyamine-cured epoxy primer/coating.

• Colour: Green, gray, redbrown, black, aluminium
• Gloss Level: Semi-gloss

Two component, surface tolerant high solids polyamine cured epoxy primer/coating with excellent corrosion and abrasion resistance

Two component high solids aluminum pigmented polyamine cured modified epoxy primer/coating.

Two component, high solids polyamine adduct cured epoxy coating with excellent corrosion resistance, and can be applied direct to metal.

Two-component, high solids, polyamine adduct cured zinc phosphate epoxy primer/coating

(Product Discontinued) This product has now been discontinued. May we suggest using PPG Sigmacover 350 LT as an alternative. Two component, solvent-free, amine-cured epoxy filler. Excellent adhesion to concrete and steel, with no shrinkage

PPG SigmaDur 1800 is a non-yellowing two-component, high solids polymeric urethane. Excellent resistance to atmospheric exposure conditions.

PPG SigmaDur 2800 is a two-component, air drying, high solids fluorocarbon finish with excellent resistance to atmospheric exposure conditions.

PPG SigmaDur 520 is a two-component, high-build semi-gloss aliphatic acrylic polyurethane finish.

SigmaDur 540 is a two-component, high-gloss, VOC-compliant epoxy acrylic finish. Please note: this coating has been discontinued and replaced with PPG SigmaDur 541

SigmaDur 541 is a two-component, high-gloss, VOC-compliant epoxy acrylic finish.

Pack Size: 4 Litres and 20 Litres

Colours: Fully tint-able

Finish: Gloss

SigmaDur 550 is a two-component, aliphatic acrylic polyurethane finish.

SigmaDur 550 H is a two-component, high solids, high-build aliphatic acrylic polyurethane finish.

SigmaDur 580 is a two-component, high solids semi-gloss recoatable acrylic polyurethane finish.

SigmaDur Clearcoat is a two-component, aliphatic clear acrylic polyurethane gloss finish.