mapei

Solvent-free concentrated bitumen emulsion for treating substrates before applying waterproofing products from the PLASTIMUL line.

Solvent-free, bitumen primer for treating substrates before applying waterproofing products from the PLASTIMUL range.

Two-component epoxy primer for oil contaminated cementitious sufaces.

Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC).

Multi-purpose, ready-to-use, synthetic resin-based bonding promoter in water dispersion with silica aggregates and very low emission of volatile organic compounds (VOC). For internal floors and walls. Bonding promoter for decorative cementitious skimming mortars from the ULTRATOP LOFT range.

Acrylic adhesion promoter for ULTRATOP LOFT and cementitious skimming mortars. For internal use.

Manually-applied two-component, polyurea waterproofing membrane.

Two-component ultra-rapid primer for Purtop waterproofing systems

Washed kiln-dried quartz sand for use with epoxy and polyurethane resin

Mapei shower waterproofing is flexible and anti-fracture. Apply before the installation of ceramic tiles or stone material. Some application examples: Waterproofing walls and floors in bathrooms and shower cubicles before laying ceramic tiles, natural stone and mosaic. Waterproofing kitchen walls and floors, and work tops before laying ceramic tiles and natural stone.

R4-class, rapid-setting, shrinkage-compensated, thixotropic, fibre-reinforced, cementitious mortar, applied in a single layer from 3 to 40 mm thick, for repairing and smoothing concrete. Available in a 25kg unit.

Topcem is a special hydraulic binder which, when mixed with graded aggregates and water, can produce an early drying high strength screed ready to receive floor finishes between 24hrs and 4 days. Topcem is defined within BS 8204 -1 section 5.1.3 part f.  Suitable for indoor and outdoor use.

Ready to use version of Topcem. Ready-to-use, normal setting, quick-drying mortarwith high thermal conductivity. Available in a 25kg unit.

Acrylic, deformable assembly adhesive for internal use, with high initial sucker effect.

Fibre reinforced self-levelling compound designed for the renovation/refurbishment of existing floor substrates. For use in both commercial and domestic situations. Can be used from 3-40mm on concrete, screed, stone, ceramic, timber.

Self-levelling, ultra-quick hardening mortar with special hydraulic binders, applied at a thickness between 5 and 40 mm to create abrasion-resistant floors.

Ultra-quick setting, smoothing, wearing screed for high abrasion-resistant Industrial floor coverings at a thickness from 5-40mm.Ultratop Industrial may remain on view as a finished floor surface due to its high mechanical strength.

One-component trowellable coarse-textured cementitious paste applied in layers up to 2 mm thick to create decorative floors with a trowelled or mottled effect.

Grout made from special hydraulic binders for sealing micro-porosity which forms after the first polishing phase of ULTRATOP