mapei

Ultra high-performance, transparent, siloxane resin water-repellent impregnator. Available in 20kg

High-penetration, colourless water-repellent treatment for cementitious renders, cellular concrete, facing bricks, face concrete, natural and artificial stone against heavy rain. Available in 10kg.

Available as 6kg tubs Synthetic resin-based primer in solvent solution to improve the adhesion of liquid elastic membranes onto existing bituminous membranes

Ready-to-use flexible liquid membrane with fibres for continuous waterproofing layers on exposed external surfaces. Available as 5kg or 20kg tubs, in multiple colours

Available as 20kg tub. Ready-mixed, high-elasticity, quick-drying, UV-resistant liquid waterproofing membrane.

Ready-to-use bonding promoter and primer made from synthetic acrylic resin and silica inerts with a very low emission level of volatile organic compounds (VOC) for render, smoothing and levelling compounds and adhesives for ceramic tiles.

Once mixed, Epojet LV and Epojet LV 40 become a very fluid liquid that can easily penetrate even in microcracks. Epojet LV and Epojet LV 40 polymerise without any significant amount of shrinkage, also on wet surfaces and once hardened are waterproof and resist chemical agents present in the air. They also have very good insulating properties and high mechanical strength.  

Two component solvent-free epoxy adhesive for construction joints and for monolithic sealing of cracks in screeds.

Mapeflex Firestop 1200°C is a refractory grout suitable for chimneys, furnaces, radiators, barbecues, flues and fire break walls

Available as 6kg or 25kg bags Bulk powder or liquid water-repellent for cementitious mortar

Idrostop Mastic adheres perfectly to surfaces, including on slightly damp surfaces, as long as they are clean and sound. Its creamy consistency compensates for slight differences in the flatness of substrates where Idrostop is to be applied. When the product is extruded from the cartridge, it forms a paste that may be applied on horizontal and vertical surfaces. At +5°C to +35°C it sets by reacting with the moisture in the air to form a plastic bead.

Ready-to-use, quick-setting and hardening, anti-shrinkage hydraulic binder.

Lamposilex is a pre-blended powder binder composed of high-strength cements and special admixtures in a formula.

Malech is a micronized acrylic resin based primer in water dispersion that, once applied on the surface, penetrates better than traditional water based primers.

Special quick-setting and drying (24 hours), controlled-shrinkage hydraulic binder for screeds. Available in 20kg bags.

Pre-blended, ready to use, fast-setting and drying hydraulic binder for shrinkage compensated screeds. Available as 25 kg bags

Epoxy paint used for the protection of floors, reservoirs and concrete pipes in contact with aggressive chemical agents such as acids, caustic solutions and hydrocarbons. Available in a 5kg unit. Technical Description Mapecoat I 24 is a two-component epoxy-resin.

Two-component transparent epoxy primer in water dispersion.

Available in 25kg plastic drums Surface treatment in liquid form made from lithium silicate with a consolidating effect, for new or old concrete floors and concrete surfaces broadcast with quartz sand.

Available in 25kg packs Hydro-oil repellent and anti-stain treatment for concrete, natural stone and cementitious surfaces made from modified organic polymers in water solution.

Mapefer 1K is a one-component mortar prepared according to a formula developed based on polymers in powderform, cementitious binders and corrosion inhibitors to be applied on reinforcing rods to prevent rust formation.

Mono-filament, virgin polypropylene fibres with a length of 12mm, for concrete

Two-component cementitious mortar for finishing concrete surfaces. Available 30kg units.

Pure epoxy, resin-based chemical anchor for structural loads. Certified for threaded bar, construction bars, core-drilled holes and C2 seismic loads. Available in a box of 12 x 385ml cartridges.