SigmaFast

SigmaFast offers a fast curing system for steel fabrication. Ensuring that you are buying and using the best products for your jobs is essential. Fabricators are increasingly needing to find ways of improve their production efficiency in an effort to ensure profitability. Essentially, for industries where speed of construction is a vital element, the PPG SigmaFast range helps improve productivity through its excellent speed of cure.

The excellent dry-to-handle times, reduce minimum over-coating intervals and ease of application are all-important reasons why many fabrication shops are choosing PPG Sigmafast products. Customers are aware that by choosing PPG Sigmafast products, specifically formulated for the fabrication industry, they reduce their down-time, improve their turnaround and increase their profit.

The SigmaFast range keeps in with the saying, ‘time is money’. This range of protective coatings improves productivity and reduces application time through fast curing.

  • Protect steel assets in a variety of industrial applications faced with tight deadlines
  • Cost effective
  • Offers extended overcoating times for greater flexibility
  • Provides excellent corrosion resistance

The SigmaFast range is used in a variety of industries and is trusted to withstand any challenging environment.

 

Disclaimer

We endeavour to keep all Data and MSDS (Material Safety Data Sheets) current and up-to-date (within the last 3 months) on our website, however it is advised that you always speak with the office to ensure that you have the latest versions. Instructions for use and Safety Information should be be strictly adhered to at all times.

 

SigmaFast 20

SigmaFast 20 is a high-build zinc phosphate primer, based on modified alkyd resin

ref

WATLA

composition

87% Polivinyl | 6,5% PES | 6,5% CO

width

140

Height

100

SigmaFast 205

SigmaFast 205 is a two-component, high-build, polyamide-cured zinc phosphate epoxy primer/coating.

  • A general-purpose epoxy primer/coating for atmospheric conditions
  • Fast-curing
  • Suitable for the protection of steel and concrete
  • Easy application by airless spray
  • Re-coat-able with most two-component epoxy and polyurethane coatings
  • Tough, with long-term flexibility
ref

WATLA

composition

87% Polivinyl | 6,5% PES | 6,5% CO

width

140

Height

100

SigmaFast 205LT

Two component high build polyamide cured zinc phosphate epoxy primer / coating. Low temperature curing.

ref

WATLA

composition

87% Polivinyl | 6,5% PES | 6,5% CO

width

140

Height

100

SigmaFast 210

Two component high build direct to metal polyurethane primer and finish in a single coat. Semi gloss Finish

ref

WATLA

composition

87% Polivinyl | 6,5% PES | 6,5% CO

width

140

Height

100

SigmaFast 210 HS

Two component high solids, high build zinc phosphate polyurethane primer/finish.

ref

WATLA

composition

87% Polivinyl | 6,5% PES | 6,5% CO

width

140

Height

100

SigmaFast 213

Two component high build polyamine cured vinyl epoxy primer.

ref

WATLA

composition

87% Polivinyl | 6,5% PES | 6,5% CO

width

140

Height

100

SigmaFast 220

Two component high build direct to metal polyurethane primer and finish in a single coat. Gloss Finish

ref

WATLA

composition

87% Polivinyl | 6,5% PES | 6,5% CO

width

140

Height

100

SigmaFast 278

Two component high solids epoxy primer and buildcoat rapid curing and overcoating even under low temperatures.

ref

WATLA

composition

87% Polivinyl | 6,5% PES | 6,5% CO

width

140

Height

100

SigmaFast 302

Two component silicate zinc epoxy primer.

ref

WATLA

composition

87% Polivinyl | 6,5% PES | 6,5% CO

width

140

Height

100

SigmaFast 40

SigmaFast 40 is a high-build finish coating, based on modified alkyd resin

ref

WATLA

composition

87% Polivinyl | 6,5% PES | 6,5% CO

width

140

Height

100

SigmaFast Holds

High build finish, based on modified alkyd resin.

ref

WATLA

composition

87% Polivinyl | 6,5% PES | 6,5% CO

width

140

Height

100

SigmaFast HS Enamel

One component modifed acrylic based air drying industrial enamel. Gloss Finish.

ref

WATLA

composition

87% Polivinyl | 6,5% PES | 6,5% CO

width

140

Height

100