Penguard HSP ZP
Penguard HSP ZP
Brand: NGC UK
Pack Size: 5 Litres and 20 Litres
Colours: Dark Grey, Medium Grey, Red
- DESCRIPTION
- Related Products
- Datasheet
- Reviews
DESCRIPTION
This is a two component amine cured epoxy coating. It is a fast drying, zinc phosphate pigmented, high solids, high build product. Specially designed for new construction where short dry to handle and over coating times are required. To be used as primer in atmospheric environments. Suitable for properly prepared carbon steel substrates. Available in 5L and 20L units.
Typical use
Suitable for structural steel and piping to be exposed to corrosive environments. Recommended for power plants, airports, buildings, refineries and mining equipment. Designed as a primer for Jotun's Steelmaster intumescent thin film passive fire protection coatings.
Approvals and certificates
Tested and approved as primer for Jotun Steelmaster thin film intumescent coatings.
Surface preparation
To secure lasting adhesion to the subsequent product all surfaces shall be clean, dry and free from any contamination. Optimum performance, including adhesion, corrosion protection, heat resistance and chemical resistance is achieved with recommended surface preparation.
Application methods
Spray: Use airless spray. Brush: Recommended for stripe coating and small areas. Care must be taken to achieve thespecified dry film thickness.
Thinner/Cleaning solvent
Related Products
-
Jotun Hardtop Pro
A two component chemically curing acrylic polysiloxane coating. It is a high solids product. It has a high gloss finish. It has excellent gloss and colour retention. It has very good mechanical properties and chemical resistance.Pack Size: 5 Litres and 20 Litres
Colours: Fully tint-able
-
Jotacote Universal
A two component polyamine cured pure epoxy coating. It is a fast drying, abrasion resistant, high solids, high build product. Designed as a universal, all round, all year, new building coating where fast dry to handle is required. -
Jotacote Universal N10
Jotacote Universal N10 is a two component polyamine cured pure epoxy coating. It is a high solids, high build, abrasion resistant product. Available with curing agents for standard, and for quick drying (QD) properties. Specially designed as a universal, all round, all year, new building coating where fast dry to handle is required. Can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments. Suitable for properly prepared aluminium, carbon steel, galvanised steel, shop primed steel and stainless steel substrate. It can be applied at sub zero surface temperatures. -
Jotun Marathon 500
Jotun Marathon 500 is a two component polyamine cured epoxy coating. It is a surface tolerant, high solids, high build product. Will continue to cure when immersed in water. The product has high abrasion resistance. Suitable for environments with very high corrosivity, such as areas in the splash or tidal zone. Can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel, aluminium and concrete substrates.
Reviews
There are no reviews yet.