mapei

Mould-resistant acetic silicone sealant for sanitary fittings for movements up to 20%.

Available in 25 x 250g bottles Set-retarding admixture for rapid-setting cementitious mortar.

Solvent-free bitumen primer for membranes from the MAPETHENE line.

Monofinish is a powdered, high-strength, one-component cement-based mortar with selected fine aggregates, special additives and synthetic polymers manufactured according to a specially developed formula. Available in a 22kg unit.

Synthetic rubber latex admixture to improve mechanical strength of cementitious mixes for screeds and renders. Also for producing bonding slurries for Mapei Screeds and splatterdash coats for renders (eg Nivoplan).

Synthetic rubber latex admixture to improve mechanical strength of cementitious mixes for screeds and renders. Also for producing bonding slurries for Mapei Screeds and splatterdash coats for renders. Available in 25kg and 200kg

Three-component fluid epoxy mortar for anchorage work

Three-component free-flowing high-strength rapid-hardening epoxy mortar applied in layers up to 10 cm thick for anchoring and grouting structures.  

 

Osmotic cementitious mortar suitable for contact with drinking water, for waterproofing masonry and concrete structures.

Available in 25kg bags Quick-setting, light-grey coloured fine mortar for repairing and smoothing concrete and render

Water-repellent cementitious skimming mortar with a fine, natural finish for concrete and plastic, glass and porcelain coatings. Available in a 25kg unit.

Available in 25kg as white or grey

Water-repellent cementitious skimming mortar with a coarse, natural finish for concrete and plastic coatings. Available as 25kg in white and grey.

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and external floors and walls, applied in layers from 3 to 30 mm to even out irregularities. Available as 25kg bags

Available as a 31.25 kg kit: 25 kg bags, 6.25 kg canisters Two-component ready-mixed, high ductility pozzolan-reaction, fibre-reinforced mortar for structural “reinforced” strengthening work, when used in combination with mesh

Available as a 29.75kg package: 25kg bag and 4.75kg drum. Two-component, pre-blended, high-ductility, fibre-reinforced, cement-free natural hydraulic lime (NHL) and ECO-POZZOLAN-based light-coloured mortar

Available in 25kg bags. Two-component ultra high performance shrinkage-compensated free-flowing high ductility fibre-reinforced cementitious mortar with stiff steel fibres.

Available in 25kg bags Fibre-reinforced, shrinkage-compensated, high-strength, high-ductility, highly-fluid cementitious mortar.

Available in 25kg bags. Ultra-high performance, high ductility, free-flowing micro-concrete reinforced with metal fibres.

R4-class, rapid-setting, shrinkage-compensated, thixotropic, fibre-reinforced, cementitious mortar, applied in a single layer from 3 to 40 mm thick, for repairing and smoothing concrete.

Rapid repair work on deteriorated concrete beams, pillars, buffer walls, cornices, edges of balconies and structural members and elements that require the use of mortar with high mechanical performance characteristics. After mixing, the product forms a mortar with good workability and with setting and hardening times that can be modulated by adding Mapetard ES. It is applied by trowel in a single layer from 3 to 40 mm thick to repair and smooth over concrete.

Plastimul meets the requirements for polymer modified bituminous thick coatings, in compliance with EN 15814. Plastimul is a solvent-free paste consisting of selected water-emulsified bitumens, special fine-graded aggregates and admixtures, manufactured according to a formula developed in MAPEI Research & Development Laboratories.

One-component, solvent-free, quick-drying, lowshrinkage, high-yield, high exibility bitumen waterproong emulsion containing polystyrene spheres.