Jotun Barrier 80 S
Jotun Barrier 80 S
Brand: Jotun
- DESCRIPTION
- Related Products
- Datasheet
- Reviews
DESCRIPTION
This is a two component ceramically reinforced polyamide cured zinc rich epoxy coating. It is a fast drying, high solids, high zinc dust containing product. It conforms to the compositional requirements of SSPC paint 20, level 2 and ISO 12944-5. It provides very good corrosion protection as part of a complete coating system. To be used as primer in atmospheric environments. Suitable for carbon steel, repair of inorganic zinc silicate coating and damaged galvanised steel substrates. This product complies with ASTM D520 type II zinc dust.
Where to use
Protective: Suitable for structural steel and piping exposed in corrosivity categories up to CX (ISO 12944-2). Recommended for offshore environments, refineries, power plants, bridges, buildings, mining equipment and general structural steel. Specially designed as a primer for coating systems where extended durability is required.
Key features
- For severe corrosive environments
- Fast dry-to-recoat
- Fast dry-to-handle
- High solids
- 80% zinc dust content
Approvals
Tested in accordance with ISO 12944-6, high expected durability in corrosivity category C5H and C5VH. Pre-qualified in accordance with NORSOK M-501 in selected systems
Colours
Grey
Application
| Spray | Use airless spray |
| Brush | Recommended for stripe coating and small areas. Care must be taken to achieve the specified dry film thickness. |
Related Products
-
Jotun Hardtop Pro
A two component chemically curing acrylic polysiloxane coating. It is a high solids product. It has a high gloss finish. It has excellent gloss and colour retention. It has very good mechanical properties and chemical resistance.Pack Size: 5 Litres and 20 Litres
Colours: Fully tint-able
-
Jotacote Universal
A two component polyamine cured pure epoxy coating. It is a fast drying, abrasion resistant, high solids, high build product. Designed as a universal, all round, all year, new building coating where fast dry to handle is required. -
Jotacote Universal N10
Jotacote Universal N10 is a two component polyamine cured pure epoxy coating. It is a high solids, high build, abrasion resistant product. Available with curing agents for standard, and for quick drying (QD) properties. Specially designed as a universal, all round, all year, new building coating where fast dry to handle is required. Can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments. Suitable for properly prepared aluminium, carbon steel, galvanised steel, shop primed steel and stainless steel substrate. It can be applied at sub zero surface temperatures. -
Jotun Marathon 500
Jotun Marathon 500 is a two component polyamine cured epoxy coating. It is a surface tolerant, high solids, high build product. Will continue to cure when immersed in water. The product has high abrasion resistance. Suitable for environments with very high corrosivity, such as areas in the splash or tidal zone. Can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel, aluminium and concrete substrates.
Reviews
There are no reviews yet.